Sharpening hedge pruners
How are you guys doing it? I'm not willing to hand file, please don't suggest that. Currently I'm using a round grinding wheel on a Dremel or a drill. Neither are ideal. I'd love to get some better...
View ArticleEaton Hyrostatic Rebuild
Ran into some issues rebuilding an Eaton 778 right angle hydro. trans. Turns out the company discontinued the parts and none of the local places have any in their bone yards for parts. The only one I...
View ArticleEcho issues...
I have been a hardcore Echo fan for a long time. I have always used their products and have had minimal problems... Here recently (last 6 months) I have had more fuel related issues with these...
View ArticleSnapper 36 Walk behind - Kohler CV12.5T
Its been a while since I have posted but was going through the equipment this past week getting everything tuned up and I noticed a puddle of oil under my Snapper 36 from sitting this winter. I do not...
View ArticleHustler Z 52, CRANK PULLEY
I have had a bit of misfortune in that my 2year old Kawa FX751V has had the crank shaft badly worn by the PTO, to speed up things, I have ordered in a second new engine and am doing the switch now....
View ArticleKawasaki fx921v-bs07-R any know issues?
Looking at a used scag with this motor. I thought I remebered them having some oil leak or usage issues. I read somewhere that it has been corrected on newer models just not sure if this is one of...
View ArticleScag Cheetah won't start
I have a Scag Cheetah that will not start. If I jumper the solenoid, it will start and run fine. But I'm not getting 12V to the small wire on the solenoid. I cleaned and jumpered the safeties on the...
View ArticleJOHN DEERE 757????
I have a John Deeere 757 and whenever I get off the seat while mower is running the battery light comes on and when I get back on the mower the light goes off..I tried reading on this issue but no...
View ArticleKawasaki FD661D 22.0
i have a 1999 Scag Turf Tiger that I'm trying to bring back to life after setting for a couple years. I've noticed the water pump is leaking! Has anyone ever changed one? It looks as if just removing...
View ArticleExmark WB veers to the left
I have a 2004 36" Exmark walk behind with the ECS controls. I know there is probably an adjustment to the hydraulics or something to keep is from veering to the left so much. Used it for the first time...
View ArticleExmark Doesn't Want To Stop
I have a 2007 exmark lazer hp. Model is LHP23ka505. The problem i am having is when i turn key off it take a while for motor to die. The first this it does when i turn switch off is rpm slows down...
View ArticleHow to get broken key out of Ignition?
I have a Deere 930m that the Key broke off in the ignition and need some advice on how to get the little bugger out of there and not have to buy an entire new ignition? Thanks.
View ArticleExmark turf tracer hp starting problems?
Exmark tt5217kaec serial #490000(2004) electric start Replaced engine with a Brand New Kawasaki FR651v-fs-00 electric start What is happening is that when I put key to the run position the fuel...
View ArticleSpyker Ride on Spreader product flow issues
Hello everyone, I just purchased my Spyker ride on spreader a few weeks ago and calibrated it. I made my first application today with a fertilizer/Barricade combo product that I've used many times...
View ArticleCheetah problem
I just picked up a new to me cheetah with 1200 hours. I'm experiencing a problem when slowing down. When traveling, if I go to slow down it starts going left and right in a jerky motion. It's almost...
View ArticleJohn Deere LX176 Kawasaki Engine - Replaced ignition coil & ignition module-...
I have a john deere lx176 with an FC420v-AS10 engine. I have replaced the ignition coil (gapped with business card) and the ignition module, I am still getting no spark. Is there anything else that...
View ArticleGas Gauge stopped working
Pulled my machine out of storage and the gas gauge on the right side reads "empty" and it's full. What's the best fix?
View Article23 hp kawasaki governor problem
changed crankcase gasket had oil leaking.After reinstalling engine on lazer z. I cannot seem to get the governor adjusted. Engine revs out of control.I adjusted the arm and the governor rod ,open...
View ArticleSTIHL HL-75 trimmer
hey everyone, one of my old friends currently gave me a STIHL HL75 hedge trimmer, it starts up but then shuts off. And when I try and start it up again it just shuts off, and it keeps doing this. And I...
View ArticleWright Sentar 61" / Hydro Gear BDP-10L-117P
Hello all, I have a 2001 Wright Sentar that I use to mow my property. The left hydraulic pump is sticking really bad. The left control lever is extremely stiff to move forward or backward. When moving...
View Article