I have a Scag Cheetah that will not start. If I jumper the solenoid, it will start and run fine. But I'm not getting 12V to the small wire on the solenoid. I cleaned and jumpered the safeties on the seat, brake, and sticks, but it didn't work. The stick safeties seem to work because it cut off when I moved the sticks. I didn't check the brake or seat safeties that way. I cleaned around the key switch and other electrical connections. Something is not allowing the 12V to reach the solenoid....
Scag Cheetah won't start
Scag Cheetah won't start
