Dixon ztr 4518 50'' Deck center spindle
Just picked up this ZTR for a STEAL of a price because it would stall when blades were engaged. Took the deck belt off and engaged the clutch and it stayed running so I narrowed it down to the deck....
View ArticleStarter motor
Why is it that when the ambient air temp is under 50 degrees, the starter drive on my ZTR will not engage the engine??
View ArticleHydro oil change ferris 3200z???
How many hours do I change hydro oil on 2016 ferris 3200z? How do I do it on this model? Owners manual does not explain when or how to change. Thanks guys
View ArticleKawasaki FC420V has no spark
I have a snapper 36" walkbehind with a kawasaki FC420V-DS09 it has no spark so I pulled the ignitor and tested but all was good. Then I pulled the ignition coil which tested bad. I put a new ignition...
View ArticleHelp Identify echo blower model
Can't find model number on this unit it was one of the first big units in seven series. View attachment 334188
View ArticleGas in oil
I bought a snapper 36" WB with a Kawasaki FC420V. I just got it running and noticed the oil smelled like gas. I drained the oil and it ended up being all gas which emptied the entire gas tank. The...
View ArticleRe-wiring Skid Sprayers: What to use?
A few of the skid spray rigs used on our fleet are due for new wiring. Both trucks have12V hose reels (Imperial & Hannay). I just took over maintenance for my company and this being my first go...
View ArticleNew walker surging and using alot of fuel
Got a brand new walker with about 15 hours on it. I know something is not right. It runs strong and is an awesome machine but I know it needs something. When I disengage the blades, the engine is...
View ArticleJohn Deere 757 zero repower
I was given a ZTrak 757 mower recently with a blown motor. The previous owner had the kawasaki FH721D motor rebuilt twice (the typical overheating, bent pushrod issue). I retrofitted a harbor freight...
View ArticlePaint an aluminum deck
Picked up a classic Toro GTS with the Suzuki engine. Pretty good shape for a thirty year old. Would be fun to restore and the deck has some sections that I want to paint. Seeing how it is aluminum, any...
View ArticleHRX217 RPM Problem
I have the 217 with blade brake and hydrostatic drive. The other day I hit a post pretty hard and didn't notice anything immediately, but on the next lawn a week later it seemed to be struggling a bit...
View Article1998 Toro groundsmaster 3000d 4wd transaxle problem
I have a 1998 Toro groundsmaster 3000d 4wd which is driven by a Sauer Sundstrand m15-iht. Inside the iht is a differential with spider gears just automotive differentials. My problem is I cannot find...
View ArticleHydro-Filter
I have a 2016 ferris is2100. It has the zt4400 transaxle. I am trying to find out hydro gear filter number to fit this unit.
View ArticleLow Compression
i was given an old mtd snowblower it is a 5 hp tecumseh hssk50. I tested the compression and it is only making 30 psi. However with about a cap full of oil, it will jump to 50 psi. What is the first...
View Articletoro timemaster engine swap
I have a timemaster 30" with the briggs and stratton engine that needs a new motor. I have a exmark metro 26 that has kawasaki fj180 kai motor that has bad transmission and bent deck. With that said...
View ArticleStihl 430 blower problem
How do you fix this? Boot and curly wire came off the coil wire. I usually tie wrap metal wire to coil wire. Then split the boot and tie wrap it on. View attachment 334115
View ArticleFh721d
Any one know if a fh770d cam will fit a fh721d,and do both cams have compression release ball's on cam lobes.thanks john
View Articlekawasaki fx730v starter problems
I have 2 customers that i know of that there units starter solenoid clicks but engages the ring gear intermittently when one keeps turning start switch to crank the engine to start and run. even with...
View ArticleKawasaki Engine swaps - Kawasaki tech around?
I've a Scag Freedom Z 48" with an FR600V-AS15-R and it runs well @ 400 HRS I've acquired a Toro 74630 SS50000 TimeCutter with a blown FR651V-CS06-R with very few hours it seems. A shop told the owner...
View ArticleStihl KM 90r-z Combi Engine problem
I purchased this stihl combi trimmer back in late 2013, it worked well at first but it didn't even make it through the end of the season with out problems. Unfortunately I had other trimmers for my...
View Article