I have walker mower that won't turn over. I traced it down to a problem with the safety ground circuit. I have 12 v to the yellow (from ignition switch) and red wire on relay D, but I don't get 12V to the yellow wire to started when the key is turned. I checked the black and white wire on relay D that is supposed to provide the ground and it seems to ohms out as going to ground as it should with all safety switches in proper position. If I place a ground wire on the black and white wire on...
Walker won't turn over- ground problem, but can't find it
Walker won't turn over- ground problem, but can't find it