ExMark Lazer Z won't start...
ok so my mower sat all winter (Wilmington NC) and now it won't turn over. not even a click. So I changed the battery and still nothing. Suggestions, before I bring it some where that will charge me an...
View ArticleManuel for a Kawasaki FD501VCS00?
Would someone happen to have a link to the Manuel for a Kawasaki FD501VCS00? Much appreciated!
View ArticleKawasaki FH680V 23hp Valve Adjustment
Hello all can anyone tell me how to set the valves on this 23hp Kawasaki i read that it needs to be done every 300hrs and this one has 1100 and i doubt its ever been done. I just bought this mower and...
View ArticleScag with 23 Kawi. Electric Start delay shutting off
My Scag walk behind with electric start when you shut the key off. I takes like 30 seconds for the engine to shut off. I've installed a new key switch and no difference. Thanks
View Article35 hp vangaurd
Having trouble starting if mower sits for 2 days. The mower is a scag. i was thinking the manual fuel pump might have a bad diaphragm but the dealer can not find out what pump is on it. If anyone can...
View Articlefaulty fuel gauge toro 6500d
hi there im currently using a toro 6500d reelmaster at my cricket club I seem to have a problem with the fuel gauge its always showing its full. its run out of diesel once already and I don't want a...
View Articlejohn deere 757 wont turn over
today i was cutting grass and mower stoped working sound like theres something in gas tank and pugs line up and after a minute it started right up. then next day it did the same thing and waited it...
View ArticleSnapper 36 Walk behind - Kohler CV12.5T
Its been a while since I have posted but was going through the equipment this past week getting everything tuned up and I noticed a puddle of oil under my Snapper 36 from sitting this winter. I do not...
View ArticleMore Battery CCAs
Is the Tractor Supply bat with 360 cca as big as they can get in a standard lawn mower battery? Mine has lasted 2 yrs and my 25 hp Kawi is dragging around slow like, have checked the valves, thinking...
View ArticleHydro Walk behind only starts when jumped
I have a 2012 Snapper pro walk behind hydro 61". I can only get it to start up when it is jumped. I just bought a brand new battery and it started up once on its own. After that I had to jump it with...
View ArticleJD X485
I have a JD X485 lawnmower. It wants to surge when I speed it up just above idle, up to about half throttle. At idle and then half throttle and above it runs smooth. What would be causing this? Thanks
View ArticleFb460v getting wayyy to much gas?!?!
Engine had been siting awhile, no spark no fuel no compression when i got it... Cleaned flywheel, coil etc and got beautiful spark. Took off valve cover and saw that the intake valve was stuck, pulled...
View Article2013 26HP Walker MTEFI
have a 2013 26HP Walker MTEFI and find it very difficult to grease the PTO joint which is recommend every 8 hours. Does any one have any supporting ideas on how do this with out so much difficult? i...
View ArticleHydro Gear Part Numbers.
I got a Bobcat ZT100 and im pretty sure the right hand hydro pump has pistons that are stuck. I want to take the pump out and take it apart but I cant seem to find any part numbers for PG pumps. I...
View ArticleHydro is jerky
when I move the right stick it sometimes jumps forward could it be a belt or hydro
View ArticleScag Tiger Cub still will not start
I posted this a while ago and I thought I had the problem narrowed down to the started solenoid but I had the starter rebuilt with a new solenoid & I am having the same problem. Here is what I have...
View ArticleKohler CV940 Oil Leak
I have an Exmark with a Kohler 34 hp CV940 engine purchased in June 2011. It has 328 hours on it. It leaks around the rear-most rocker cover. I replaced the gasket friday, came in today and there is...
View ArticleLandPride Razor Parking brake stuck?
Hello all, My neighbor has a LandPride Accu-Z Razor Z52. The left drive wheel is stuck. I can hear the hydrostat engaging, but the wheel won't budge. I released the bypass valve rods per the owner's...
View ArticleHelp the newbie!!!!
Just bought a craftsman pressure washer with a Briggs and Stratton engine not running for forty bucks. I I can smell gas and gets spark but won't start. Any ideas? Thank you.
View Article