Kohler ecv940 blowing up due to exmark design flaw
Has anyone else had problems with the Kohler redtech ecv940 engine blowing up on their exmark? The way they have the engine sit in sideways with the head next to the hydro causes it the valves to stick...
View ArticleHusqvarna Edger 525ES
I have an edger that is having trouble starting. It also doesn't consistently stay running when the choke is off. I've been using a trimmer to edge but have time today to work on the edger. Any ideas...
View Articlehydraulic leak
Hi I have 610 that's running great but I got a hydraulic leak and don't know when the filter was changed last. Figured I do it. People since it will drai since the leak is on a flare fitting at the...
View ArticleDixie Chopper diesel won't start.. after sharpening blades!!!???
Hi all, I have a Dixie Chopper XWD2600 Diesel and today I pulled it up on a ramp to remove the blades. It sat at a 30 degree angle front up in the air for about 30 minutes. I then tried to start it and...
View ArticleVoltage drop at regulator on my kaw fh721v
As it run s the voltage started at12.80 Dropped to 12.37 Not enough to charge battery I did replace stater last year And most recent the regulator melted ? What should the ac reading be out of the...
View ArticleEcho PB-755 won't restart when hot
Ive got a PB-755 that will not restart after it gets hot. Starts after 2 pulls when cold but if I blow off a driveway then ride to the next yard if it close it will not start. Doesn't sound like it is...
View Article2012 exmark vantage electric pto problem
Hi guys. recently on my 2012 exmark vantage, the pto disengages frequently on rough terrain or bumpy lawns. Like I hit a bump and the blades shut off. Pto engages immedaitely after but is happening...
View Articleswapping brands of carburetor on a riding mower
I have a 13.5 Briggs motor with a nikki carburetor, and want to know if a Briggs or other types of carburetor will interchange ,and if there less expensive to rebuild? Thanks
View ArticleScag tt2
i have a tt2 with 40 hours on it when I am mowing with in if I am on a hill or in a ditch and push on the left leaver I fell a bump and I look at the wheel is jerking my dealer has replaced the wheel...
View Articleecho trimmer going dead?
my echo trimmer seems to have a lot less power than it did when i bought it 2 years ago. it takes longer to warm up, and has less power, it is the GT-200R, and i am using a bump head with .105"...
View ArticleVermeer S600TX help
I picked up a S600TX. 2009. 30 Horse Kohler. 1200 Hours. I love the machine but it leaks hydraulic oil pretty bad. I spent 3 hours cleaning everything inside the machine. Scraped out over 50 lbs of oil...
View ArticleHydro gear issue
I have a 2011? Scag tiger cat, about 700 hours. Always been good on maintenance. Noticed a problem over the weekend. After things warm up, about 5 to 10 min, I can only push my left hydro control lever...
View Article26 HP EFI Kohler not charging battery...any ideas?
This is on my Great Dane Chariot 61". I checked all of the fuses, and put on a new battery thinking that was the problem. I checked the connection on the rectifier ( I think its the rectifier -- it has...
View ArticleHydro growl
I picked up a new Exmark ztr the other day and I've put just an hour and a half on the meter but there's still a loud growl from the hydro. It seems to get a little louder going up the ramp and up...
View ArticleExmark TT with Kohler CV20-s caught on fire. Salvaged, but need help
She still runs, but the idle oscillates/surges a bit. She won't hit the high rpm note. It is almost as if it is at 3/4 throttle. I can then use a screw driver to push the carb linkages to get the full...
View ArticleJohn Deere 717A, safety interlock, drive control arms
I have a problem with my JD 717A and the control arms locking out a signal when starting the engine. At rest, the control arms are spread wide, and should allow the engine to start. This is not a seat...
View ArticleFlywheel Torque Question Briggs Vanguard
Hey all, I've replaced the stator on my Briggs Vanguard 350776 0046-02, and now I need to reinstall the flywheel and torque the nut. I'm trying to find a manual that has that information, a member of...
View ArticleBilly Goat 16HP blowing A LOT of white smoke this morning.
I don't get how one day no problems with this thing and then we get to this job this morning i check the oil (like i do every morning) and there is no oil and so i add oil start it up first pull and...
View Articlecarb issue, b&s
hi, i waited for a friend to help. and well that is 2months now and im getting screwed lol (fall is here, leafs are falling and i have no machine). it's for a walk behind blower. last season, at the...
View ArticleKawasaki starter out
stator? Voltage at battery stays at 12 volts with engine on or off. Three wires coming out of voltage regulator. Two bussed together . Shouldn't two have ac coming out? Fh541v View attachment 332221...
View Article