Mower is a model LZ23KC604 with Kohler model CH23S, Spec 76569. While mowing, usually several minutes after engaging mower deck, the 20 A solenoid fuse blows. Starts and runs well so solenoid should be OK. Checked voltage at clutch connector per another thread: 12.54 V while battery reads 12.62 at terminals. Continuity good for ground wire at connector. Resistance reading across clutch is 2 Ohms. I did notice that one wire coming out of the connector showed more bare wire than the other, so...
Kohler Command 23 Fuse blows while mowing
Kohler Command 23 Fuse blows while mowing