The other day I was mowing and a stick caused the hydro belt on my Ferris to jump the pulleys. I got it back on, and discovered the cause of a chattering noise, which got worse.
The tensioner arm was oscillating and even causing small Sparks on the underside of the mower. I figure I'll replace both the idler and tensioner/idler pulley as pm- but is this a simple case of the pivot bolt needing torqued? The spring was a tight MF to get reattached, so I'm sure it's ok.
The tensioner arm was oscillating and even causing small Sparks on the underside of the mower. I figure I'll replace both the idler and tensioner/idler pulley as pm- but is this a simple case of the pivot bolt needing torqued? The spring was a tight MF to get reattached, so I'm sure it's ok.