I have 2 Exmark Lazer Z mowers both have 60" ultra cut decks with chains.
My problem is 1 cuts 1/2" lower than what it's set at and the other cuts 1/4" lower. I tried to adjust the 1 than is 1/2" off with no luck. I followed the manual directions to lower the whole deck and can not get it to match the indicator. Also it is pitched 1/2" higher at the back of the blade than the front. I am measuring the cut height at the front of the blade closet the discharge chute with the blade in the front...
Exmark deck height different than what it's set at
My problem is 1 cuts 1/2" lower than what it's set at and the other cuts 1/4" lower. I tried to adjust the 1 than is 1/2" off with no luck. I followed the manual directions to lower the whole deck and can not get it to match the indicator. Also it is pitched 1/2" higher at the back of the blade than the front. I am measuring the cut height at the front of the blade closet the discharge chute with the blade in the front...
Exmark deck height different than what it's set at