Kohler CH740-0088 in a 2008 Exmark Navigator. Single barrel carb. I removed the engine, tore it down enough to put in new rings and head gaskets. Had the cylinders deglazed, etc. Put it back together and set the governor as the manual says, and hooked up the throttle and choke cables as the manual says as well as making it look just like the pictures I took before I removed everything. When I push the throttle lever to full throttle, then back to idle the linkage does not return to the...
Throttle not returning to idle after complete engine teardown
Throttle not returning to idle after complete engine teardown